6-12V 0.9/1.8A NIMH charger
Home-->Products-->Charger-->NIMH NICD charger-->6-12V 0.9/1.8A NIMH charger

Product Description:

Features  Universal Fast Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 6V - 12V, for 5 to 10 cells pack. 
LED flashing red-green-red before charging (no battery connection) in order to test the IC of the charger if ready to use. 
It is a very smart charger.  Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged  
Short circuit protection: No output voltage from the charger if the battery is not connected. 
120-240V AC input for worldwide use. 
Built in temperature sensor to double ensure the battery pack from overcharged 
Specs & Functions  Auto detect battery pack voltage and set up proper charging voltage  
Cut-off power automatically by negative delta V IC when battery pack is fully charge. 
Built in IC protecting battery from over current, short circuit & reverse polarity.  
Charging Current  Two current levels: 0.9A and 1.8A selectable by a switch for both low (< 2800mAh) and high capacity battery pack (> 2800mAh) 
For battery pack between 900mAh and 2800 mAh, please use the low level switch -- charging rate: 0.9A 
For battery pack over 2800 mAh, please use the high level switch -- charging rate: 1.8A 
Charging time  The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow: 
Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 0.9A or 1.8A ) 
 Dimension (LxWxH)       140mm x 64mm x 38mm (5.5" X 2.5" X 1.5") 
 Weight        1.2 lb (544 g) 

Pre:V-PCM-Li-10S-2      Next:7.2V 1A Li-ion/Li-po battery charger