search

7.2V 1.2A li-ion airsoft gun charger
Home-->Products-->Charger-->Airsoft gun Charger-->7.2V 1.2A li-ion airsoft gun charger

Product Description:

 

 
 

Minimum
Normal
Maximum
Unit
100
115/230
240
Vrms

 
 47Hz~63Hz
 
1A.(MAX)
 
 
115V/40A(max.), 230V/80A(max.)
at 25at cold start.
 
     1.5 Power efficiency
70% (min.) at full load, 110Vac or 230Vac 50Hz.
 

 

 
 

 


2.1   Its output voltage is 8.4+/-1%V at standby. Constant Current Constant voltage.
     
2.2 Led display
       Green on standby
Red on charging
Green on full charge when charging current drop to 200+/-15mA.
3.0 PROTECTION
 
Output over voltage protection with zener diode.
 
The output short to ground, it will auto-recovery without damage.
3.3 Output reverse input  protection
       When output reverse input,the unit and the battery will be no damage.
 
4.0 HI-POT
   4.1 HI-POT
       4.1.1 P~S:1800Vac 3S,the leakage current is lower than 10mA;;
     
5.0 ENVIRONMENT:
 0 to +40
     20% to 85%
 -40 to +70
     10% to 95%
 
6.0 SAFETY:
6.1    MET/UL1310
6.2    CE + GS + CB + PSE
6.2.1 EN60335-2-29
6.2.2 EN60335-1
 
7.0 EMI:
7.1 FCC part15
7.2 EN55022 classB
7.3 EN55014-1/2
7.4 EN50366
7.5 EN61000-3-2
7.6 EN61000-3-3
 
8.0 DROP TEST
       8.1 Freely drop the wooden board from the height of 75cm
               for two times per side(front/back/left/right).
 
9.0 VIBRATION TEST
       9.1 Vibration frequency:5-60-5Hz with 10 octave/min@2.1G
9.2 Three circles per axis(X,Y,Z) for 10minutes
 
10.0 MTBF
40,000 hours base on bellcore TR332 document required  at 25.
           
11.0 Outline
11.1.Outline dimension: 75X 46X 29 mm MAX;;
11.2.Profile:surface smooth ,no scar and mechanical damage.

Pre:V-PCM-Li-2S-6      Next:CR1632