1.0 INPUT

     1.1 Voltage

1.2 Frequency

  47Hz~63Hz

1.3 Current

2.0A.(MAX)

1.4 Inrush current

115V/40A(max.), 230V/80A(max.)

at 25℃ at cold start.

     1.5  Power efficiency

75% (min.) at full load, 115Vac 60Hz.

2.0 OUTPUT

2.1  Charge curve

2.1.1  This charger can charge 6~10pcs series Ni-MH/Ni-Cd battery.

     2.1.2  End charge by -∆V(about 20mV) detection

2.2  Led display

      2.2.1  Red and green led flash for 2 times after  the unit  connect 

AC source, then both off.

          Red led on charging

          Green led flash on trickle charge

          Green led on full charge

3.0 PROTECTION

3.1 Over voltage protection

3.2 Short circuit protection

The output short to ground, it will auto-recovery without damage.

3.3 Output reverse input  protection

       When output reverse input,the unit and the battery will be no damage.

4.0 HI-POT

     4.1 HI-POT

        P~S:1800Vac 3S,the leakage current will be lower than 10mA.

5.0 ENVIRONMENT:

 5.1 Ambient operation temperature

  0℃ to  +40℃

 5.2 Ambient operation relative humidity

     20%  to  85%

 5.3 Ambient storage temperature

 -40℃ to +70℃

 5.4 Ambient storage relative humidity

     10%  to  95%

6.0 MTBF

40,000 hours base on  bellcore  TR332 document  required  at 25℃.

7.0 Dimension

       Outline dimension:120L X 60W X 38(H) mm MAX.